
Inquiry
Inquiry
• Real improvement by adopting/adding DSD decoding
7 input terminals
• High performance ear amplifier
Single ended and balanced switchable fixed/variable output
The very high-quality new M6 SDAC has a 32/768kHz sampling/re counting DAC. 7 inputs: 3 x coaxial, 3 x fiber optic and 1 x USB. It can decode all data rates up to 32-bit 768kHz and DSD 64/128. All input samples reached 32/768.
The extremely low output impedance of the headphone amplifier ensures extremely low distortion. It can drive any earphone to its highest electrical frequency.
Single ended/balanced output has extremely low distortion, large bandwidth, and extremely low effective output impedance. It can switch between fixed and variable.
M6 SDAC has incredible low distortion, 0.0004% 20kHz. Stereo separation is better than 120dB. The signal-to-noise ratio is better than below 119bB. The music is presented as if on a black velvet background. Linearity is better than 110dB. It surpasses every technological height.
Fixed/variable, single ended/balanced output using state-of-the-art components and circuits is the best technology and sound performance with special load driving characteristics, which will perfectly drive any combination of wire/length/electricity.
Ear amplifiers share the same design principles and are perfectly implemented.
The instant sound of M6SDAC gives the impression of elegance and transparency, a feeling of communication with artists, as if hypnotized and awe inspiring. It blends so seamlessly in music: the overall sound is sweet and clear; The high notes are natural and extended. The bass sounds endless, with a powerful and rapid impact/attenuation sensation. As expected, its outstanding performance can be seen from the 120dB separation: from one side to the other, the artistic conception is arranged, and there is a clear sense of real-time recording by the performer.
| Output (RCA/XLR) | |
| Output impedance | 47Ω |
| Output, digital 0dB level | RCA output -2.2V R.M.S; RCA4.4 V R.M.S.(XLR) |
| Headphones | |
| power | 1.5W/channel 32 Ω |
| Output device | 2 pairs of channels |
| Output impedance | 40 Ω earphones suitable for 10-600 Ω |
| THD | < 0.005% 20Hz—20kHz |
| Signal to noise ratio | > 115dB ”A”wtd |
| frequency response | 0 1dB 20Hz—50kHz |
| DAC | |
| DAC circuit | 32bit Hyperstream II |
| Total related jitter | < 120000 second peak value - peak value |
| linear | < ± 0.1dB as low as -96dB |
| frequency response | < Typical range from 2 Hz to 90 kHz- 3dB (192 kHz input sampling rate) |
| Channel separation | > 105dB 20 Hz to 20 kHz |
| Signal to noise ratio | > 120dB ”A”wtd |
| THD | < 0.0012% 10Hz—20kHz |
| Connect | |
| Linear level output | 1 pair of linear level RCA (singing and playing), left/right |
| 1 pair of linear level XLR (balanced), left/right | |
| Numerical input | 3 sets of RCA coaxial SPDIF inputs, 32-192 kbps (16-24 bit stereo PCM) |
| 3 sets of TOSLINK fiber optic inputs, 32-96 kbps (16-24 bit stereo PCM) | |
| 1 set of USB 2.0 inputs‘ B 'type port for computer/PDA/other devices 16-24 bits, 32-192 kbps | |
| Fully asynchronous (actual confirmed value depends on music source file, computer software settings) | |
| Power Supply | |
| Main power supply | 230V/115V built-in or 100V optional |
| power waste | 10 watts maximum |
| Weight | |
| Net weight | 6.9kg |
| Gross weight | 10.3kg |
| Size | |
| wide | 440mm |
| High (including base) | 100mm |
| Deep (including wiring terminals) | 380mm |