Distribution

Distribution

M6S DAC  Decoder

Inquiry

M6S DAC Decoder

Inquiry

• Real improvement by adopting/adding DSD decoding

7 input terminals

• High performance ear amplifier

Single ended and balanced switchable fixed/variable output


The very high-quality new M6 SDAC has a 32/768kHz sampling/re counting DAC. 7 inputs: 3 x coaxial, 3 x fiber optic and 1 x USB. It can decode all data rates up to 32-bit 768kHz and DSD 64/128. All input samples reached 32/768.


The extremely low output impedance of the headphone amplifier ensures extremely low distortion. It can drive any earphone to its highest electrical frequency.


Single ended/balanced output has extremely low distortion, large bandwidth, and extremely low effective output impedance. It can switch between fixed and variable.


M6 SDAC has incredible low distortion, 0.0004% 20kHz. Stereo separation is better than 120dB. The signal-to-noise ratio is better than below 119bB. The music is presented as if on a black velvet background. Linearity is better than 110dB. It surpasses every technological height.


Fixed/variable, single ended/balanced output using state-of-the-art components and circuits is the best technology and sound performance with special load driving characteristics, which will perfectly drive any combination of wire/length/electricity.


Ear amplifiers share the same design principles and are perfectly implemented.


The instant sound of M6SDAC gives the impression of elegance and transparency, a feeling of communication with artists, as if hypnotized and awe inspiring. It blends so seamlessly in music: the overall sound is sweet and clear; The high notes are natural and extended. The bass sounds endless, with a powerful and rapid impact/attenuation sensation. As expected, its outstanding performance can be seen from the 120dB separation: from one side to the other, the artistic conception is arranged, and there is a clear sense of real-time recording by the performer.


Output (RCA/XLR)
Output impedance47Ω
Output, digital 0dB levelRCA output -2.2V R.M.S; RCA4.4 V R.M.S.(XLR)
Headphones
power1.5W/channel 32 Ω
Output device2 pairs of channels
Output impedance40 Ω earphones suitable for 10-600 Ω
THD< 0.005%   20Hz—20kHz
Signal to noise ratio> 115dB ”A”wtd
frequency response0 1dB 20Hz—50kHz
DAC
DAC circuit32bit Hyperstream II
Total related jitter< 120000 second peak value - peak value
linear< ± 0.1dB as low as -96dB
frequency response< Typical range from 2 Hz to 90 kHz- 3dB (192 kHz input sampling rate)
Channel separation

> 105dB 20 Hz to 20 kHz

Signal to noise ratio> 120dB ”A”wtd
THD< 0.0012%   10Hz—20kHz
Connect
Linear level output1 pair of linear level RCA (singing and playing), left/right
1 pair of linear level XLR (balanced), left/right
Numerical input
3 sets of RCA coaxial SPDIF inputs, 32-192 kbps (16-24 bit stereo PCM)
3 sets of TOSLINK fiber optic inputs, 32-96 kbps (16-24 bit stereo PCM)
1 set of USB 2.0 inputs‘ B 'type port for computer/PDA/other devices 16-24 bits, 32-192 kbps
Fully asynchronous (actual confirmed value depends on music source file, computer software settings)
Power Supply
Main power supply230V/115V built-in or 100V optional
power waste10 watts maximum
Weight
Net weight6.9kg
Gross weight10.3kg
Size
wide440mm
High (including base)100mm
Deep (including wiring terminals)380mm
M6 Encore ConnectListM6 Vinyl Sing And Play

Related Information

HomeHome

Home

AboutAbout

About

AgentAgent

Agent

DistributionDistribution

Distribution

ContactContact

Contact

Copyright: Shantou Meifeng Audio Equipment Co., LtdPowered by: 11400.cc